Forum Title: Kitchen Sink Hot Water Low Pressure
I replaced my undersink water filter which runs off of my cold water. For replacement I turned off both the hot water and cold water valves under the sink. When I turned the water back on I lost all pressure in the hot water. I tested all other hot water faucets in the house and all are OK. I tested the aerator, not clogged OK. I disconnected the hot water connect from under the sink to the faucet and turned the water on and nothing came out. Which leads me to believe it is not a problem from under the sink to the faucet. What should I do next? Thanks!
Category: Plumber Post By: DORA DAWSON (Reading, PA), 07/20/2016

Replace or repair the valve under the sink.

- JULIA ROSS (Montgomery, AL), 09/19/2017

Thanks for the response, John. I took the hot water pipe valve off from under the sink, a little sediment came out but the pressure is still low. What next?

- BOBBY HUGHES (New Rochelle, NY), 10/01/2017

Turn the main water off then remove the stems on the valves under the sink and check for obstructions in the valves.

- IVAN LUNA (Freeport, NY), 10/12/2017

Homeowner Plumbing Support & Resource Links

requestaquote Get Free Quotes callnow 888-880-2779